1170Nov Supplies in office technology

Why Supplies Are Not a Simple Matter for Office Technology Dealers

Your customers probably need three things beyond the printers, MFPs, copiers, scanners, and other office technology equipment you already provide. They want ink and/or toner, parts, and paper. They also expect other things you’re already very good at, like service and support.

Yet, like it or not, your dealership may not be the only source for any of these. You have some type of service and support agreement with most customers that includes parts, supplies, and consumables. But as you and your customers know, your dealership is not the only game in town, and keeping the machines well fed and running is not exactly rocket science. So, what should dealers and customers do? Probably things most dealers do already.

Charles Brewer, president of Actionable Intelligence, a research firm based in Massachusetts, said most dealers have contracts with customers that specify the use of OEM-approved parts and service. This is commonly part of the monthly or quarterly invoice paid by a customer. This approach helps ensure maintenance and support of key devices. Support is a phone call away and can often occur on the same or next day; that’s mission-critical for many customers. OEM service also matters because technicians have been trained and qualified on the same model machines the customer has, and they know the “gotchas” that might stump an independent repair tech who may turn to YouTube for help. Even though devices change almost annually, some minor changes can be sufficiently idiosyncratic to need specialized care. A simple printing problem may arise because some (free) firmware wasn’t upgraded. A trained tech may recognize and rectify such a problem in a few moments, and when a new part is needed a dealer is likely to have it in stock or can obtain it overnight, speeding problem resolution and helping ensure customer satisfaction. In contrast, a local tech may look online for answers or take longer to obtain the needed part. Time is efficiency or money for most businesses, so getting a device up and running is often a priority. All dealers know this, and most customers opt for the plan dealers offer.

Supplies for office technology equipment: offshore, onshore, or nearshore

You know this: your iPhone was made in China. So were the products of many familiar brands. Where a product is made is becoming irrelevant. Welcome to the 21st Century! Some branded printers, copiers or MFPs are made in China to tight specifications and are backed by U.S. warranties. Brewer explained how some name-brand vendors either own subsidiaries in China that make products destined for the USA or have agreements with Chinese companies to make products to certain specs for a given market. You can also buy things from European sources (also offshore), or Canada and Mexico (nearshore) or the USA (onshore).

Even consumables can be complicated

“The golden egg is supplies, so the Japanese companies that make a device don’t want to have China making that stuff,” said Brewer. “Whether it is made in the U.S. or in Japan the manufacturing of devices and consumables is tightly controlled.”

While service contracts specify use of OEM toners and inks, some customers balk at the cost of OEM toners when they notice that remanufactured toner cartridges can be significantly less expensive. While not all customers care, some may ask about the cost difference if they look at the website of a major re-manufacturer, shop online, or have out-of-warranty machines that do not use OEM consumables. In addition to cost, part of their rationale can be the apparent simplicity of toner.

While basically finely ground plastic, toner is visually similar from one OEM to another. But it is not necessarily the same. “Toner formulation is how and where the imaging takes place,” said Brewer. Each toner possesses a specific electrochemical charge and melting point that is made to work with the drums and rollers of a manufacturer’s devices. This matters when a device is under warranty and dealerships have to stand behind a manufacturer’s warranty. It can also matter terms of image quality. Text is simple but OEM toner may be better at printing a photograph than a generic toner.

Some customer lease agreements may have limits on how long warranty restrictions for using OEM consumables are required, leaving some customers to shop for toner online, taking money out of a dealer’s pocket. Or they keep an out-of-warranty device and use after-market toner. Brewer noted that only a few companies on Amazon (mostly Chinese) are actually behind the dozens offering products (this applies to many kinds of parts). I recently tried two of these. One leaked magenta toner everywhere after a couple of months. The next set of cartridges seems okay so far but requires a minor hack of the major-brand MFP in my office to get it to run if the machine is ever powered down, the internet fails, or even if it is not used every day. Some of my team is not happy. One team member uses an inkjet MPF instead.

Reverse engineering

FYI, more changes lie ahead, perhaps already nibbling on your paranoia. “A huge factor is reverse engineering,” noted Brewer, explaining that the microchip attached to the toner cartridge has become a critical issue. “OEMs insist this chip is essential,” he noted.

So, here’s where the reverse engineering can come in. Suppose a third-party toner maker already knows the proper electrochemistry used when making the toner and has cracked the code to reverse-engineer a chip that is attached to the toner cartridge. Not being very smart, printers and MFPs may “think” the toner and chip are fine, so the device prints, less expensively, with no hesitation. Now use your imagination. Suppose a reverse-engineered chip is installed on a replacement cartridge packed with what seems to be OEM toner, available for 30% less than the real stuff. Call me crazy, but there is probably some money to be made here. Dealers should ask OEMs what they can do to help combat this because it may be coming soon to a printer near you.

Paper is less of an issue, and most papers work well in any printer or MFP, although a steady diet of cheap paper may cause dust issues. Customers going through a lot of paper may find it more practical to buy paper from dealers by the case, so they always run name-brand paper.

Just stay with your OEM(s). There are far more important things to think about. Your service is more reliable, and the price difference is rarely a make-or-break matter. The whole device is under warranty, and OEM parts and consumables will work as intended, making most support a one-visit venture. Meanwhile, be sure to ask OEMs for a warning about any upcoming supply issues. Then you’ll know to order in advance, based on the page volume and the amount of consumables customers use. And don’t forget the rebates on the toner you sell.

Related Articles